HSW Honeycomb Storage Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 66mm Width x 44mm Depth x 50mm Height (internal volume) storage box for the Honeycomb Storage Wall.
- Rating
- 4.818 / 5
- Likes
- 359
- Downloads
- 1,871
- Makes
- 13
- Views
- 5,722
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple box for some added storage on your Honeycomb Storage Wall.
Walls and base are all hard-modeled with the honeycombs, so no need to tweak print settings to get the honeycomb right.
I printed with 4 perimeters to add some strength to the frame and hex pegs for mounting.
You'll need to also print 2x hollow inserts from the original Honeycomb Storage Wall.
Prints without supports.
Box itself is very sturdy, despite using very little material.
You can obviously put anything you want in the box, I used it for glue-sticks .