1 / 2
Voron compatible Prusa X carriage Remixes
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Makaizou MOD Voron extruder/hotend assembly on a Prusa style machine
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 49
- Makes
- 0
- Views
- 580
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
It will protrude about 4mm in front of the initial position of the mk3s nozzle. Also, the nozzle position may be about 1.8mm higher.
BOM :
- two LM8LUU bearings
- seven heatset inserts, the same kind that is used on all Voron parts (M3x5x4)
- three M3x50 screws
- two M3x10 screws
CAUTION
The insert nut and bearing will interfere, so you will need to file it down after installing it.
After printing this MOD, processing such as cutting off the interfering parts is required to match the actual product.
You may need to modify this MOD yourself.