1 / 4
Watering can / pitcher / vase
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Solid watering can / pitcher to be printed in vase/spiral mode. Watertight if printed correctly, fully scalable!
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 61
- Makes
- 0
- Views
- 262
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
This vase has to be printed in VASE MODE ore FAKE VASE MODE. Settings I recommend:
- vase mode (or fake vase mode with 0% infill)
- no top layers
- 5 solid bottom layers
- extrusion width 2x nozzle size (0.8 mm for 0.4 mm nozzle)
- 50% speed reduction
- Extrusion multiplier / flowrate 120% for the bottom layers
- Extrusion multiplier / flowrate ≥100% for the upper part
- Limit or disable retraction/pressure advance
My YT channel episode on mastering watertight prints https://youtu.be/xLQYteNuwgQ