Mounting Plug for Ineos Grenadier Barrier / Hanger Holes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting plug that takes an M6 bolt, can be used to mount items to hang or better utilize the barrier mounting holes.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 129
- Makes
- 0
- Views
- 1,087
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Mounting plug that will take an M6 bolt, shown with a JCB / furniture connector bolt but you can use any M6 bolt. JCB bolt can insert from rear, there is also space for up to a 16mm washer so you can insert a bolt from the front and secure to a nut on a washer to spread the load. Barrier mounting hole is 13mm wide so a 16mm washer on a bolt would catch the load if the printed plug failed. Shown printed in Overture PLA Pro Space Grey, 0.16mm layer, 50% tri-hexagon infill, 4 wall line count, normal zig-zag support.