Multi Material Palette - Quick Test Print for MMU3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A quick (~1h) multi-material print designed to test the MMU3 using all 5 filaments.
- Rating
- 5 / 5
- Likes
- 66
- Downloads
- 1,294
- Makes
- 16
- Views
- 2,524
- Reviews
- 14
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Share Alike
This is a simple model designed to test the Prusa MMU3. It uses all 5 filaments to create a palette identifying each spool by its number.
Its definitely not the prettiest model you will print with your MMU3, but it is certainly useful to test if your setup is working reliably with all 5 filament channels, with regular changes for approximately 1 hour.
You can use this print instead of the traditional MMU sheep if you want a faster print that uses all 5 filaments, before you go for a larger print.
Printing Tips
The .3mf slicer file is included, you just need to slice it and send to your printer. GCode also included for MK3S+ MMU3.
I printed mine with 0.20mm (speed) and 10% infill, and changed the bottom infill to Octogram Spiral just for fanciness (this is already set within the .3mf file).