Soil Block Maker PiP / Soil Blocker PiP
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are three soil soil block makers which are printed in place including screwable dimple makers.
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 250
- Makes
- 3
- Views
- 1,574
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
Three soil block makers with changeable dimple makers (screwable)
Dimensions of the blocks:
35 x 35 x 35 mm
25 x 25 x 30mm
35 mm round / 35mm high (fits the common growing boxes)
Because i had some adhesion problems, i added a version with small connection between the stamp and the housing, you can cut them off easily after printing.
The threads for the dimple makers are M4 and printed. I made three versions of the dimples with 4.0, 3.9, 3.8 and 3.7 threaded roads. In my case the dimples with 3.8mm threaded rod fits best. If you have problems with this, first try to screw a normal screw (M4) into the stamp.
Printing:
PLA, layer height 0.1mm in the region of the threads, i prefer to use adaptive layer height