1 / 3
The simplest fume extrachtor (120mm Version)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the simplest fume extractor you can build for soldering, while its simple, its quite compact also.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 105
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
!!PLEASE READ BEFORE PRINTING!!
Key features:
- No fasteners needed*
- .step files are provided: easy to modify and remix
- Durable: you can drop it and the fan will have more damage than the printed part ;)
- Doesn't tip over: when filled with sand its heavy enough to handle a fan with 3100 RPM
B.O.M:
- Vitamins:
- 1x 120mmX25mm fan (I used a Sunon MEC0251V1-000U-A99 )
- 1x Sheet of activated carbon filter Link
- 2x M4x25mm screws (Optional)
- Some dry sand
- Printed Parts:
- 1x body
- 1x Arms1 and Arms2 (Optional if you fill it with sand)
Printing:
- Material: basically anything works, from the cheapest PLA, to the most expensive PEEK
- Print settings:
- PLEASE DISABLE THE COOLING FAN
- Max 0.35mm Layer height and 0.6mm nozzle
- 0% Infill
- 3 Peremiters minimum
- Only the main body with arms need support (its included in the 3mf)
- Please add a PAUSE PRINTING command when printing the filled body