Nerf Gjallarhorn - Printed Shells - WIP
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Everyone needs more shells Still testing some versions
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 65
- Makes
- 1
- Views
- 713
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hasbruh decided one of the coolest blasters they ever released gets to come with a measly 4 shells, and I took that personally (actually a friend did, but details). Well now you can properly load up for a round of shenanigans with printable replacements for the stock shells that function just as well if not better.
Note: the nature of printing and printers, as well as different darts, different environments, etc, mean you may have to adjust print settings for best performance. I have included some test fitment files in the test fit pieces folder. I recommend printing at least one of these first and then adjusting settings in your slicer to optimize fitment to your ammo.
These shells have a built in sacrificial support for the retention notch. In my experience it actually works with that piece intact, but for best reliability you should trim it away like pictured after printing. Lightly running a lighter over the spot afterwards will help remove the plastic stress marks.
My shells support the following ammo options:
-triple_elite - Fits 3 full- or half-length darts, or 6 half-length darts, or a whole bunch of really short cut down darts. Performance: “Triple elite is so good”
-triple_mega - Fits 3 Mega darts, possibly more cut down Mega if you use them. Performance: “Triple mega works welll(sic)”
-triple_ultra - Fits 3 Ultra darts, I guess you could cut them down to fit more but why?
-single_rival - A single-barrel shell for optimally 2 but up to 3 Rival rounds. Performance: “Btw rival shell works perfectly[with 2 loaded]", but is a little lackluster with 3. Will be testing an updated design to fix this.
-single_mxl - For a single MegaXL dart that does stick out of the shell but still loads fine. Performance: “Mega xl shell works well”
I also include the following outer decoration options:
-plain - Smooth outer surface with no decorations.
-patterned - Similar patterning to the shells included with the blaster, but more consistent.
Don't print the files in the radio's casings folder, these are just for customizing around.
Big thanks to Radioactive for sizing the barrels for these shells, check them out on Etsy https://www.etsy.com/shop/RadioactivesDesigns