1 / 2
Protective Case - fits Anker 737 - TPU
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Needed something to protect the battery, so I made this.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 41
- Makes
- 1
- Views
- 344
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Recommended print settings:
- Material: TPU (we used 95A)
- Walls: 2 or 3 (we used 3)
- Top/bottom: 5
- Nozzle: 0.4 or 0.6
- Infill Density: 10
- Infill pattern: Cross 3D
- Bed: 0
- Fan: 100%
- Adhesion: Skirt (or choose your own)
- Print & infill speed: 25mm/s