1 / 1
Isometric Cube Seamless wall art (Filament Painting) — image 1

Isometric Cube Seamless wall art (Filament Painting)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Filament painted print made using HueForge - Filament swaps ONLY, no mmu/ams required

Rating
0 / 5
Likes
16
Downloads
44
Makes
0
Views
421
Reviews
0

Updated at source:

Model information

Category
Wall-mounted
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

2 Colour ‘Filament Painting’ model - Isometric Cube Seamless wall art

 

(I recommend the following speed settings for the bambu with 0.04 layers, inner walls, outer walls and gap infill - 200mm/s, sparse infill, internal solid infill and top surface - 150mm/s)

Leave The Aux fan off on the bambu as it causes more harm than good on these larger prints

 

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm

Filaments Used:
PLA Bambu PLA Matte Charcoal Transmission Distance: 0.6
PLA Bambu PLA Matte Ivory White Transmission Distance: 4

Swap Instructions:
Start with Charcoal
At layer #14 (0.76mm) swap to Ivory White for the rest.

 

Virtually and colour combination will work as long as the second colour has a Transmission Distance of 2 or higher - MIX IT UP! and show me your results

Use the exact numbers in your slicer to match up properly.


**If Scaling the model make sure not to adjust the Z-Height of the model**

 

ALL of Ian Smalley's designs are protected by Copyright Law. Downloading does not give you permission to use the files or physical prints for financial gain. If you want a commercial license to Legally sell prints from my designs, you will need a SELLER subscription.

 

Source Image by renata.s on Freepik

Tags