1 / 4
Bambu Lab Infill Swatches
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small 50mm diameter infill swatches.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 52
- Makes
- 0
- Views
- 469
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
Infill swatches for display of what possible infills are available for each print.
Printer: Bambu Lab X1 Carbon
Infill: 20%
Nozzle: 0.4mm
Layer height: 0.2mm
Filament: MatterHackers MH Build Series PLA Yellow
All were printed on the 256mm x 256mm bed of the X1 Carbon in one print. All can fit on the build plate.
If you do not use the gcode and want to slice it yourself, then make sure to remove all top layers. This will allow for the display of the infill.