Vice Jaw
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These two plastic vice jaws (125mm, flat and with notches) are used to protect your material during clamping. The…
- Rating
- 0 / 5
- Likes
- 52
- Downloads
- 144
- Makes
- 0
- Views
- 1,181
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
These two plastic vice jaws (125mm, flat and with notches) are used to protect your material during clamping.
The difference to other designs - the magnets sit in slots at the top, are fully protected, and can be fixed such that a removal without damage is possible.
The design is made for 2-3 magnets with a maximum size of 10x2mm (8x2 mm possible).
To fix the magnets, place them in the slot and close with the small printed caps. A drop of glue (blue UHU) fixes the caps. Alternatively you can close the slot with glue.
I printed vice jaws with notches with a powder coated PEI sheet and the others with a regular PEI sheet to get a very flat surface without texture.
I used only 2 magnets but you can also use three for better holding force.
Scale the vice jaws for a larger width.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
0.3mm
Infill:
100%
Filament:
BasicFil PLA Blue / Orange
Category: Tools