IKEA LACK - spoolholder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
IKEA LACK - spoolholder without drilling holes. Holder uses 6004 bearings and are modular, can be made to any width.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 54
- Makes
- 0
- Views
- 608
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
IKEA LACK - spoolholder - without drilling holes.
I was looking for a compact solution for my IKEA LACK to keep the spool near the machine without sticking out too much. In addition, I did not want to drill holes as the legs are basically cardboard for the most part.
So I have created a model that uses all 3d printed parts including PTFE tube guides for easier filament loading.
The model:
The spool is modular, meaning you can add extentions. It makes use of the excellent 6004 bearings design by @Jerryie
| Part/file | No. | Print recommendation |
| spool_holder | 1x | 0.2 layer height, 4 walls, 15% infill |
| spool_start | 1x | 0.2 layer height, 4 walls, 15% infill |
| spool_end | 1x | 0.2 layer height, 4 walls, 15% infill |
| spool_section | 2x | 0.2 layer height, 4 walls, 15% infill |
| 6004_bearing | 2x | 0.2 layer height, 4 walls, 15% infill |
| M6x50 | 2x | 0.12 layer height, 4 walls, 15% infill |
| backplate | 1x | 0.12 layer height, 4 walls, 15% infill |
Result
The holder and backplate should fit snuggly around the leg, use the screws, once you hear cracking, it is firmly in place.
You can use a split connector to connect 2 pfte tubes like this example, for quick spool switching
20240107 - modified spoolholder - larger PTFE guides.