Dial indicator support for Tevo Tarantula
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A strong, stable (very important) and very convenient dial indicator support that is set at the back side of the Tevo…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 135
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
A strong, stable (very important) and very convenient dial indicator support that is set at the back side of the Tevo Tarantula X-carriage.
I use it for manually leveling the bed, and to set the nozzle height at the right distance to get a nice first layer.
This design is useful for the dial indicator that can be bought in Aliexpress http://bit.ly/2zvLmud.
The main printed part needs to replace the original back side of the dial indicator using the very same tiny and stock screws.
To hold the dial indicator to the X-carriage, I use two 6mm screws that are tightened to two internal bolts that are introduced into the piece.
To avoid scratching the aluminum or acrylic carriage, I designed and use a protective piece that is to be placed between the end of the screws and the aaluminum/ acrylic.
Print Settings
Printer:
Tevo Tarantula
Rafts:
No
Supports:
No
Resolution:
0,2mm
Infill:
40%
Category: 3D Printer Accessories