Needle / Syringe Caps
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Some protective Needle caps to store your needles safely.
- Rating
- 5 / 5
- Likes
- 91
- Downloads
- 626
- Makes
- 7
- Views
- 3,924
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
A needle cap to protect your (mostly workplace) needles, store them a bit more safe and without smudging you other stuff with its liquids :)
I mainly want to use this on all of my solder flux and solder paste needles. But recently also filled a few with oils. And I also found them a bit uneasy to handle because of the dirty needles. I often unscrewed the needle and put the small caps on them again and store them in small plastic bags.
Now I can just put a cap on it and throw them in my tool drawers without smudging all my tools or running the change or grabbing into the needle part when searching for tools.
PRINT :
0.2mm layer, no support.
I printed them from Prusament PETG (orage) and Colorfab XT (transparent). Without MMU. I just changed the filament halfway the print. I thought it would be handy to be able to see the needle end.
SIZE :
I uploaded 2 version as the measurement comes pretty close and seems to differ a bit between needles. My 2 needles where either ~9.5mm or ~10.5mm.
If the 2 sizes I provided don't fit nice enough, you can try a few things :
- Scale up or down with ~1% in the slicer.
- Use the 3D file I uploaded to adjust it to your dimensions.