1 / 2
CASE for GeeekPi 7 Inch Capacitive Touchscreen
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is for the GeeekPi 7 Inch Capacitive Touchscreen. I wanted a case for mine, so this is what I came up with.
- Rating
- 5 / 5
- Likes
- 39
- Downloads
- 569
- Makes
- 1
- Views
- 1,941
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Has been tested on 2 different screens to confirm tolerances.
Tested Print settings- 0.2 Layer Height, 30% infill, printed back to face of build plate.
To confirm the exact GeekPi 7 model I used here→ https://a.co/d/cPXtGqt
I used 4 - M2.5 x 8mm bevel head screws.