Large Adjustable Monitor Shelf
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Large (10.25 inches deep x 6 inches wide) version of the Adjustable Monitor Shelf.
- Rating
- 0 / 5
- Likes
- 37
- Downloads
- 203
- Makes
- 0
- Views
- 1,406
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
I needed a larger monitor shelf to fit the LEGO Technic Perseverance Rover I got for Christmas, which is pretty large and fairly heavy. I liked the design of GiskardReventlov's “Adjustable Monitor shelf”, but it wasn't deep enough for my needs. In order to support the additional weight and depth I had to increase the overall thickness of the shelf.
I printed two shelves and placed them side by side to support the rover. I did have to add a small piece of 2-sided 3M tape just below where the support arm makes contact with the monitor so the weight of items on the shelf didn't cause the shelf to drop a bit (pic included). I could probably sturdy up the support arm a bit and adjust the length to where that's not needed, but for now it's working fine.
In the pics I have a few strips of black electrical tape to keep the rover from slipping when bumped since I have it angled slightly higher in the back.
Filament: Sunlu PLA+
Layer Height: 0.2mm
Supports: None
Infill: 20% Cubic (seems sturdy enough)