Rex-C100 Temperatur Controller Housing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Housing for neatly wiring a Rex-C100 temperature controller.
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 261
- Makes
- 1
- Views
- 2,439
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
Housing for a REX-C100 Temperature Controller with switches to shutdown the controller or interrupt the SSR relay, while keeping the controller running.
Rear is cutout for a housing Schuko socket from PCE, 20mm opening for a cable gland and a 16mm cutout to install a plug for the thermocouple.
All screw holes 3,3mm for cutting M4 threads into.
The Housing is folded from 0,7mm strong sheet metal, but could also be 3d-printed.
Warning:
SSR Relay get's moderately hot, it might need an additional heatsinking.
Although it currently looks alright to run a 2,4kW oven from it.
To be safe print stuff out of PETG or ABS.