1 / 4
Creality Falcon 2 12mm Laser Crosshair Bracket — image 1
1 / 4

Creality Falcon 2 12mm Laser Crosshair Bracket

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This friction mount is to mount a 12mm diameter laser crosshair module on the Falcon 2 22/40w laser module.

Rating
0 / 5
Likes
12
Downloads
176
Makes
0
Views
852
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

This mount is to add a 12mm laser crosshair for the Creality Falcon 2 22/40w laser engraver/cutter. 

I removed the original cable from the laser module by opening the module. I took the cheapest USB-C cable and cut it to about 10 cm, the cable only had 2 cores, the end of which I cleaned and soldered to the place of the original cable.

Extra hardware: 6mm screw to replace the 4mm from the laser module, (the screw is part of the Falcon2 package) 

Print Settings:

  • 0.2mm Layer
  • material: PLA (or any)
  • Filament used(g): 2.7g
  • Filament used(m): 0.91m
  • Est Cost (PLA): $0.08(eur)
  • Print time: ~8min