Dark Holocron that opens! (Multi Color)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial
A dark holocron that opens! Snug an LED candle into the round part of the removable tip and screw it to the bottom of the holocron.
PRINTING INSTRUCTIONS:
Because of round overhangs that would be impossible to print, I put supports in the locking mechanism at the bottom of the holocron, where the candle will rest. Make sure to pause the print when the middle part is done and carefully remove the supports with an x-acto knife to clean the channels where you would screw the tip in.
I designed the holocron for multicolor printing. I don't own a MMU or Palette yet, so show me your prints!
You can, off course, print whatever colors you want.
I designed it to fit a 37x20mm LED tea-candle light. Scale accordingly for whatever dimensions you have and make sure to test print the "Tip" to see if it holds.
Category: Props