4010 fan mount for Raspberry Pi 4 (Voron 2.4 LDO kit)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed model to fit on a Pi with power header.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 138
- Makes
- 0
- Views
- 833
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Made to fit on my RPi 4 in the bottom of my Voron 2.4, where the Pi gets its power via a seperate header from the octopus board. When remodeling, I decided i want to use M3 heatset inserts. Bores are bigger now, to fit the inserts. Fixed with 3 M3x12 socket head screws.
Printed in ASA with Voron settings →0.2mm layer, 4 perimeters, 5 top layers, 5 bottom layers, 40% infill, 0.4mm nozzle. I used organic painted supports for the arms.
I used a 12V 4010 fan and hooked it onto the octopus, configured in klipper as a temperature fan with PID control. Keeps the Pi at 60°C at approx. 50% fanspeed.