V-SLOT 2040 BASE
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.19 – €0.23 net (excluding VAT)
For file: T_NUT_4.8D.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.21 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 15 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
The legs raise the printer structure by 25mm. They facilitate operations related to table adjustment.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 49
- Makes
- 1
- Views
- 322
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
To immobilize the leg, I added a T-nut into which a screw with an M5X16 hexagonal socket should be screwed. After inserting it into the V-SLOT rail, carefully tighten the screw.
Printed from PETG, lightning filling.
The leg height is 25mm.