Magnetic Frame for Rectangular Hygrometer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My take on a magnetic frame for a rectangular hygrometer
- Rating
- 5 / 5
- Likes
- 26
- Downloads
- 103
- Makes
- 0
- Views
- 470
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
I'm still new to 3D printing and CAD, so I wanted to take a stab at my own frame for a drybox that I am making. This is a little over-engineered compared to other designs that I have seen.
I had some 4mm X 1.5mm magnets handy, so that it what I used. The fit was tight; I used a rubber mallet to press them into the holes. There is a little bit of play on the sides of the hygrometer.
I made the CAD drawing in OnShape and the outer dimensions of the hygrometer, the hygrometer mounting tabs, and the magnet dimensions are all variables in my drawing. If I have done everything correctly, the document should be public and you can make a copy to modify it to your own needs.