Bath and Shower Corner Organiser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An organiser with provisions for a shelf, soap, razor and wash cloth. A separate mount makes cleaning or removal easy.
- Rating
- 5 / 5
- Likes
- 31
- Downloads
- 125
- Makes
- 1
- Views
- 853
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial
This organiser not only provides a shelf for your shampoo, it also has an enclave for your soap to drain, somewhere to hang your washer or scrub, and razor.
The wall adapter part allows the shelf to be removed for cleaning. It can be mounted with screws, double sided tape or silicone so it can be easily removed.
This can be printed on one of its sides, which will not generate supports for the hex drain holes when they align vertically.
Ensure there are tree/organic supports about half way along the arm where the washer hangs with the use of a support enforcer.
A brim is recommended, specifically for the wall part when printed vertical as above, and for one end of the first layer where it is a thin strip.
3 wall loops worked for me, otherwise no specific requirements beyond support.
A step file is included if you wish to mix it up.