1 / 1
Shower rod toothbrushholder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A shelf to hold toothbrushes etc that clips around a 24mm rod
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 24
- Makes
- 0
- Views
- 156
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a place to hold some toothbrushes in our shower. This little shelf clips around the 24mm diameter rod which carries the water to our shower.
It was designed to be a snug fit when using the more flexible ABS (also for heat resistance). I would suggest printing only a part of the top section to experiment with scaling when trying to print this out of PLA. scaling it by 101% to 102% is probably a good starting position, this is usually the range of shrinkage of ABS.