Flic Hub Mini Magnetic Mount Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model is for the mounting of a flic hub mini to a magnetic surface (like a fridge or filling cabinet)
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 30
- Makes
- 0
- Views
- 201
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is for the sole purpose of mounting your flic hub securely to a fridge or similar metallic flat surface.
This hub holder was made using rhino and requires the use of two 5mm high x 8mm diameter magnets. i welcome modifications to the file and if the original is desired please let me know :D
The model is printed with the flat part down and requires no suports.
the hub has a friction fit and will not go anywhere on its own when in the mount/bracket thanks to the rubberised bottom of the hub and will be further secured when the magnets are in place.
please let me know if a model with counter sunk holes in place of the magnet holes would be desireable and i can update the model.