1 / 8
Bandeja magnetica , Magnetic tray — image 1
1 / 8

Bandeja magnetica , Magnetic tray

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Bandeja magnéticas con dos divisiones y apila bles.

Rating
0 / 5
Likes
2
Downloads
16
Makes
0
Views
182
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial


Bandeja magnéticas con dos divisiones y apilables.
En la altura de capa antes de que haga el techo de los agujeros interiores, hay que pausar la impresión ya sea mediante g codes o manualmente e insertar los 4 imanes de 10mm de diámetro por 2 mm de ancho o mas pequeños en los agujeros y luego continuar la impresión para que los selle en su interior.

Nota : yo emplee unos mas pequeños puesto que todavia no me han llegado los que compore con esas medidas de (10x2)

--------------------------------------------
Magnetic tray with two divisions and stackable.
At layer height before you make the roof of the inner holes, pause the print either by g codes or manually and insert the 4 magnets 10mm diameter by 2mm wide or smaller into the holes and then continue printing to seal them inside.

Note: I used smaller ones since the ones I bought with those measurements of (10x2) have not yet arrived


Alturas de capa:0.2
Relleno:20 %
Habilitar alisado si se quiere para que la superficie de la base sea mas lisa para su mejor limpieza.

--------------------------------

Layer Heights:0.2
Infill:20%
Enable smoothing if you want so that the surface of the base is smoother for better cleaning.

Tags