Brennestuhl Premium Line Desk Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bracket to clamp a Brennestuhl power strip to your desk.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 55
- Makes
- 0
- Views
- 495
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- GNU General Public License v3.0
Bracket to clamp a Brennestuhl power strip to your desk.
Uses a 3d-printed set screw to tighten against the desk.
Use a PH2 bit to carefully screw it in.
Don't overtighten, or it will strip.
I used 4 M6x16 screws + bolds and washers to secure the power strip to the bracket.
If you want to use different sized bolds, I've attached the Fusion 360 file for modification.
You will need to print 2 of “bracket_1_v3.stl” from this model by Woodchuck.
You should print this model with lots of infill, or else it will flex too much.
I used 30% Rectilinear, and it felt very sturdy in the end.