HP 800 G1 USDT DVD Drive blank
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Blanking plate for use when not using the DVD drive in the HP 800 G1 USDT
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 82
- Makes
- 0
- Views
- 474
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this to fit in the front of the HP 800 G1 USDT if you are not using the DVD drive and want to replace the drive with a drive caddy, or leave it empty.
I spent alot of time adjusting the scale of the item to try and get all the grill parts to line up perfectly but as you can see in the image, i was never that successful. Sorry.
You could cut the design in half and print out a test part to save some plastic and when happy with the alignment, print the full thing.
Design
I designed this in 2 parts so it can print on a build plate easily. The back plate has 2 longer clips due to the design of the PC front panel. (see the 3rd image)
When glued together with CA glue, the front grill should sit flush with the front of the PC. It relys on the taper on the edges to stop it falling through the hole in the case.
Mine fits fine, but if yours is recessed a little, you could adjust the scale to make it a little wider.