simple Dumbell Weight Holder
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€4.09 – €5.00 net (excluding VAT)
For file: simple_dumbell_weight_holder_petg.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.54 excluding VAT (range midpoint).
- Weight reported by the author
- 73 g
- Print time reported by the author
- 4 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
simple pole to stack weight plates with inner diameter of 30mm, standard climbing carabine hook can directly clip in
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 26
- Makes
- 0
- Views
- 348
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial
I really liked the Crimp Strength Trainer from @mtongnz_243883, but i wanted to use the Weights ob my dumbells. So i designed it to fit 30mm Weight Plates.
I did some testing with 8 Kg as in the first picture. The Handle in the picture is from https://www.printables.com/model/697557-crimp-strength-trainer the open model and some 4 mm Rope
Printed with 7 Walls and 10% Gyroid infill.
I used a raft and some supports for the tip.
Cheers.