1 / 2
HSW Empty Insert - Rotated
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Honeycomb empty insert rotated 30 degrees from the standard model
- Rating
- 5 / 5
- Likes
- 35
- Downloads
- 212
- Makes
- 2
- Views
- 800
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Take a look at the pictures to see what I've created (upper insert) compared to the standard (lower insert). I can't speak to the structural strength (or weakness) of my model - add comments if you have some.
If you have settings that have already been working with the HSW system, then you should be good to go. If not, what I've been doing is:
- Print External Perimeters First
- Layer Height: 0.2mm
- Infill: 0%
The face looks pretty ugly (I've been printing with the face down as the first layer) but the exposed face is pretty small and once I add an a specific insert it's not noticeable at all.