1 / 4
3M 6878 spectacle kit for Full Facepiece Respirators 6000 Series — image 1
1 / 4

3M 6878 spectacle kit for Full Facepiece Respirators 6000 Series

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

3M 6000 series full face respirator spectacle mount.

Rating
4.5 / 5
Likes
19
Downloads
255
Makes
2
Views
1,743
Reviews
2

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Share Alike

I bought a 3M 6000 series full face respirator. It's great, but obviously not compatible with my spectacles. So I looked for the spectacle kit that I was sure would exist…
http://web.archive.org/web/20201202214246/https://www.winc.com.au/main-catalogue-productdetail/3m-6878-spectacle-kit/25042148
A$243.00 ?!


And it's just a bent piece of wire and a couple of injection moulded parts. Total manufactured cost couldn't be north of $5.
Hunting around I could get it for A$180… but that's still crazy.

So — here 'tis. My first draft 3M 6000 series spectacle kit. I removed the arms from an old pair of glasses and attached them with a zip tie.

Source OpenSCAD file attached, because always include your sources.

 

 

Print Settings

Printer Brand: Prusa

Printer: I3 MK3S

Rafts: No

Supports: No

Resolution: 0.2

Infill: 100%

Filament: Aurarum PETG Natural 

 

Notes: 

Print resolution could be coarser, but it's only a ~30m print. There's a mild overhang in the lower key details, but even printing this into fresh air it comes out just fine.

OpenSCAD dependency: https://github.com/revarbat/BOSL2/

Tags