1 / 15
Prusa mini Base lowered
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Prusa mini Base shorter/smaller
- Rating
- 4.889 / 5
- Likes
- 89
- Downloads
- 425
- Makes
- 10
- Views
- 4,389
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
The base was too high.
I didn't want the filament under the printer.
So I "cut off" the base without further ado. (approx 32 mm)
The building instructions are basically the same as those shown in the blog.
https://blog.prusaprinters.org/enter-the-mini-base_50290/
The upper inserts are still original.
UPDATE 19.09.21: adding PSU Holder
UPDATE 25.09.21: adding Z-axis support
Maybe you have ideas to attaches some things.
Front legs
Rear legs
