1 / 1
D&D 5e Cleric Weal and Woe cards for Augury — image 1

D&D 5e Cleric Weal and Woe cards for Augury

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Spice up the Augury spell by letting your DM reveal that future with these Tarrot inspired cards.

Rating
0 / 5
Likes
8
Downloads
48
Makes
0
Views
482
Reviews
0

Updated at source:

Model information

Category
Board Games
License
Creative Commons — Attribution

When using the Augury spell your DM is supposed to tell you if good or bad things are going to happen with “Weal, Woe, and Weal + Woe”. I wanted to have some fun cards that would stand up to the occasional spillage so I made these.

To get the exact look I made here are the instructions:

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Matte Sakura Pink Transmission Distance: 3
PLA BambuLab Matte Ivory White Transmission Distance: 4
PLA+ Sunlu Skin Transmission Distance: 5
PLA BambuLab Matte Sakura Pink Transmission Distance: 3
PLA BambuLab Matte Ivory White Transmission Distance: 4

Settings:
.04mm nozzle
.08mm Layer
.16mm First Layer Height
100% Sparse Infill Density
Rectilinear Infill Pattern

Swap Instructions:
Start with Charcoal
At layer #10 (0.88mm) swap to Red
At layer #14 (1.2mm) swap to Sakura Pink
At layer #17 (1.44mm) swap to Ivory White
At layer #18 (1.52mm) swap to Skin
At layer #19 (1.6mm) swap to Sakura Pink
At layer #20 (1.68mm) swap to Ivory White for the rest.

Tags