Neptune 4PRO X Axis Linear Rail Mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Conversion from factory rails to MGN15H 300mm
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 64
- Makes
- 0
- Views
- 1,879
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v2.0
Still in progress !!
Works with a few tweaks.
Conversion from the factory rail with rollers to a 300mm KGN15 rail with MGN15H carriage.
V3:
Same issues as V2.
Added spacer for printhead (Druk X 5) Best to print in TPU.
Small tweaks to all parts.
There is no need to cut out some fragments on left belt guide and endstop adapter.
V2:
Known issues:
Y axis is ~15mm of.
X axis is ~5mm of.
The purge line can be off the bed depending on start gcode.
Tinkering with limit switch will probably help.
Printing without supports.
I used transparent PET-G with 100% infill, trying to get the glass look but it didn't work.
Only the carriage must be durable/stiff with higher thermal resistance.
Necessary things:
-T-Slot profile 20x20x360mm (the original from Elegoo N4Pro is incompatible)
-2x Roller with bearings GT2 20T 5mm
-MGN15H carriage
-300mm Rail KGN15
-1000mm Belt 6mm
-Invert X axis Stepper Motor Direction.
The simplest way is in printer.cfg change [stepper_x] from dir_pin:PC13 to dir_pin:!PC13
Also change the position of the limit switch