1 / 5
Soss 100 Template
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is a hinge jig for the Soss 100. You mortise the hole using a template bit and the print. Then you use a 3/8" drill bit for the center portion. I created an MDF template from the print since I was going to be making many mortises. Then I attached 2 blocks to the jig to stabilize it and give me reference points for aligning. I also made a little cross to help align the mortise with the center of the boards.