1 / 6
Oral B Toothbrush Holder V2
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holder to hang two Oral B toothbrush heads without the water running into the heads.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 25
- Makes
- 0
- Views
- 209
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial
Holder to hang two Oral B toothbrush heads without the water running into the heads. A glass can be placed under the holder.
I made a model package that is attached to a board with the bracket and a model package that stands on the table. There are suitable models for glasses with a diameter of 50 - 60 mm. Other diameters are also possible on request.
Improvements to V1:
- added an own bracked model
- better ratio of stiffness to mass
- optical improvements
- added model package to stand on the table
Printing parameters:
- Material: PLA / PETG
- Layer height: 0.2 mm
→ Maybe lower for the screw and the bracket due to the thread. Depends on the printer quality. Mine worked fine with 0.2 on a BambuLab X1C. - Support only needed for the bracket (see last picture, overhangs in the stand max. 60°)