towel holder - gravity powered
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The towel is clamped and held in place by the power of gravity.
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 135
- Makes
- 0
- Views
- 1,364
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution
This towelholder uses the power of gravity to grab and hold your towel. Just push it in from below and release it. The gravity will pull it down, the teeth grab it and hold it tight.
To release the towel, push it up a little, pull the teeth with the knob back and take out the towel.
In the back side there is a hole: you can screw it onto the wall.
To ensure the flexibility of the joint, I have used a support blocker in prusa slicer (the dark red column on the left): here no support will be printed, so the bolt can rotate.
In the grey print of an earlier prototype you can see that there is no support printed around the hinge so it can rotate.