SodaStream CO2 cylinder wall mount for kitchen cabinets
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€3.51 – €4.29 net (excluding VAT)
For file: SodaStream CO2 cylinder wall mount_0.3mm_PETG_MK3S_3h7m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.90 excluding VAT (range midpoint).
- Weight reported by the author
- 70 g
- Print time reported by the author
- 3.11 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a wall mount for all standard types of SodaStream CO2 cylinders compatible with a standard Ikea kitchen cabinet.
- Rating
- 5 / 5
- Likes
- 99
- Downloads
- 268
- Makes
- 1
- Views
- 1,318
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is a wall mount for the inside of any standard Ikea kitchen cabinet that is designed to hold two of any standard type of SodaStream CO2 cylinders. By using the wall mount the usually unhandy and clunky SodaStream CO2 cylinders can be stored nicely without any rolling around or risk of falling over. Moreover, this also allows utilizing spaces in your kitchen that might otherwise be unusable for any type of storage. In my case, for example, I managed to get the wall mount right underneath my kitchen sink, where I was able to use space that was totally wasted beforehand.
The wall mount fits in any standard Ikea kitchen cabinet with pre-drilled holes with a diameter of 5mm and hole spacing of 32mm. The distance between the two mounts needed to hold the cylinders is simply the already given distance between the existing rows of pre-drilled holes in your cabinet. Slight deviations in the hole spacing in each row can be compensated by the included slotted hole in the wall mount. The distance (center to center) between both mounting holes of each wall mount can therefore be in a range from 89-96mm. The mounts are secured to the cabinet using Ikea 100372 screws (http://tinyurl.com/4fepve84) or similar.
For printing, I recommend the uploaded print settings with 4 walls, 4 top and bottom layers as well as 20% infill to achieve the necessary strength of the part. The wall mount I installed is made of PETG as it is close to my warm water supply, but PLA will work equally. For the print direction, I would also recommend the displayed positioning to optimally utilize the prints preferred strain-direction.