Hueforge 9 color Oshi No Ko Starry Eyes Wallart
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Beautiful wall art requiring 9 colors
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 325
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
YOU CANNOT SELL THIS WORK
In order to sell this work you must purchase a commercial license from the makers of Hueforge. I just have a public license so I am able to share the STL file I made for free!
Here is the link to the creators program to purchase!
https://shop.thehueforge.com/collections/hueforge
---------------------------------------------------------------------------
Bambu P1S - printed using an 0.4mm nozzle and 0.04 layer height, but you will get better results using an 0.2mm nozzle. Slow the speed down by about 25% speed total (even slower than Bambus silent mode)
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
Filaments Used:
PLA Elegoo Black - Rapid PLA+ Transmission Distance: 1.5
PLA Inland Purple - PLA+ Transmission Distance: 2.5
PLA Inland Egyptian Blue Transmission Distance: 3.5
PLA Elegoo White - Rapid PLA+ Transmission Distance: 9.5
PLA+ Sunlu Red Transmission Distance: 6
PLA Elegoo Pink - PLA+ Transmission Distance: 7.2
PLA Elegoo Orange Transmission Distance: 12
PLA Elegoo Beige Transmission Distance: 8.8
PLA PolyLite Yellow Transmission Distance: 11
Swap Instructions:
Start with Black - Rapid PLA+
At layer #3 (0.24mm) swap to Purple - PLA+
At layer #7 (0.4mm) swap to Egyptian Blue
At layer #12 (0.6mm) swap to White - Rapid PLA+
At layer #13 (0.64mm) swap to Red
At layer #24 (1.08mm) swap to Pink - PLA+
At layer #28 (1.24mm) swap to Orange
At layer #32 (1.4mm) swap to Beige
At layer #44 (1.88mm) swap to Yellow for the rest.
---------------------------------------------------------------------------
