device / mounting box for parapet duct / cable channel / electric shaft (Brüstungskanal)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Device / mounting box to click into 130 x 65 mm parapet duct from Hornbach
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 102
- Makes
- 0
- Views
- 553
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
As i wasn't happy with the mounting boxes which i could buy/print, i created my own design for my workshop rebuild. Originally i printed https://www.printables.com/model/318561-cable-duct-cable-channel-mounting-box-installation (which didn't fit on mine, recognized after the print ;-).
Target was to have a simple and cheap solution which is clicked into from the frontside.
To check if it fit i added a drawing with measures of the click in area.
PS: This is my first version which i upload during construction work - so I've currently no experience if the clips are strong enough, but feedback is welcome and i will update the model. Also all other ideas are welcome.
Printing Info
I did currently only a speed print with 250 mm/s, 0.32 layer height, no support, 3 walls, 4 top/bottom layers, 10% cubic infill with PLA