Dodecahedral holonomy maze
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is my own version of Dodecahedral holonomy maze. The Original was made by Henry Segerman (Henryseg on Printables).
- Rating
- 4 / 5
- Likes
- 9
- Downloads
- 53
- Makes
- 1
- Views
- 585
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my version of the Dodecahedral holonomy maze invented by Henry Segerman. You can find his video about it here:
He also sells the original version of the maze: https://www.shapeways.com/shops/henryseg?section=Holonomy+mazes
Find him also on printables: https://www.printables.com/@henryseg
I designed my version in segments that have to be assembled. The pegs are also printed separately.
BOM:
| Quantity | Item | Description |
| 14-28 | M3x30mm | For connecting the segments, depending if you want to connect them with 1 or 2 screws each. |
| 30 | M3x35mm | Longer screws to connect the segments with pegs. |
| 2 | M3x40mm | Screws for the entrance pegs |
| 46-60 | M3 nuts |
Printed parts:
You need 10 normal segments and 1 left entrance and 1 right entrance. Additionally you need 15 normal pegs. Finally you need the rook. The rook has a hole, in which you could put a M3 headset insert in. So you have a better grip with a screw.
I printed the partsmostly with a 0.15 mm layer height.
I would recommend you to print one segment first to see, to see if your printer is able to print the corners without support.
Assembly:
I just started by assembling the segments and adding the pegs afterwards. As a reference, where to place the pegs I looked at Henry Segermans Video and at the 3d model on shapeways. Of course you can also make your own mazes.
Have fun printing and playing.