1 / 2
Bathroom shower corner shelf
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this shelf to replace the old and rusty one from the bathroom .
The pipe diameter is 25mm and the shelf hole is conic, starts in the up side with 27mm and end's in the bottom with 30mm, it has a rubber inside the hole and stick's on the pipe with it !
The dimensions are L 230x l 230x h 40mm material thickness 2mm
The model needs support
i used PLA