Tetrahedron
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.18 – €0.22 net (excluding VAT)
For file: Tetrahedron_PLA_MK4IS_16m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.20 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 16.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Tetrahedron with inner columns. STL has 45mm side length. 30mm on GCODE.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 92
- Makes
- 1
- Views
- 297
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution
I came with this tetrahedron while learning the basics of Fusion 360. Supports were quite hard to remove, but I'm happy with the results.
Could be used as a sturdy painters pyramid or as keychain. If you need modifications or have any ideas concerning the model, let me know.
The GCODE is only 30mm for test and has variable layer height and supports, printed with Prusa MK4 and 0.15mm speed mode.