Simple Keenso USB Camera mount for Elegoo Neptune 4 Plus
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Snap together mount for the Keenso 1600 * 1200 2MP USB Camera in both a moveable ball as well as a fixed position unit.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 94
- Makes
- 0
- Views
- 948
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This is a simple camera mount for the bare Keenso 1600 * 1200 2MP USB Camera Module found on Amazon. Enough to get a view within Fluidd of the initial printing progress.
All printed the parts friction fit together. Use the cabinet screw just behind the control pad to go through the post base and back into the cabinet. The length of the USB cable works out nice for this spot.
There is a single camera face file, and 2 variations of the back of the camera that attach to 2 variations of the post. The original thought was the ball mount, but find myself bumping into it and knocking the camera out of whack. The fixed position square mount version solves that.
As far as printing goes there should be no need for supports in the given orientations printing at reasonable speeds. The ball mount is initially tight and benefits from a PLA+ or PETG filament with some give.
You might want to see the YouTube video titled "Installing Webcam on Neptune 4 Plus" to get the camera running.