Strata 2 MX goggles nose cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A nose cover for Strata 2 MX goggles. Made for TPU.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 108
- Makes
- 0
- Views
- 714
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
This is a simple nose cover for Strata 2 mx goggles from 100%. I ride quite a lot in cold weather and this helped a lot.
Made to be printed in TPU so it's soft and doesn't risk hurting your face in a crash. I printed it in Fiberlogy 40D without any issues. The cover is made so it presses into the vent on the underside of the goggles and latches to the very shallow groove over the nose. It would stay on well for me unless accidentally bumping it, but I glued it in the end so I could remove my goggles without having the cover fall off.
Given the risk of TPU bonding to the PEI plate, I recommend covering the print area with blue painters tape. I used some spray glue on top of that. A bed temp of 40c worked well for me. I printed in an enclosed Bambu Lab P1P.