Manual Multicolor Filament guide for the Original Prusa Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.42 – €0.52 net (excluding VAT)
For file: filament_guide_b-R1-manual_multicolor_0.4n_0.2mm_PETG,PETG_MK4IS_26m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.47 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 26.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Original Prusa Enclosure Filament Guide manual multicolor arrow
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 102
- Makes
- 5
- Views
- 913
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v3.0
Update:
- Added Mirrored version for left corner of OPE.
Print instructions:
- Print only the model you need (Standard vs. Mirrored version)
- Open the .3mf file as a project to load all manual MMU settings
- There are 4 color changes
- First color to print is the base, second color is the arrow. So for example, if you want a black guide with orange arrow, start with loading black PETG.
- All print settings are configured for 0.4mm nozzle with typical Prusa print instructions for parts.
Note: As of 5.1.3 firmware, there is a bug that surfaces as a “black screen” when you send this file from your PrusaSlicer to the printer. The official workaround is to just upload it to the printer and trigger print via web (Prusa Connect or PrusaLink). All goes back to normal after that.
Link to issue: https://github.com/prusa3d/Prusa-Firmware-Buddy/issues/3525