Jar Lid Silica Container
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lid mounted silica gel container for chemistry / general purpose jars
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 35
- Makes
- 0
- Views
- 425
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
I like to store my rocket fuel and black powder in these 1000ml jars. They have a convenient double lid and seal pretty well, so I designed this container to keep my chemicals dry. It mounts to the jar lid from the inside and is designed to be fairly low-profile and universal. The dimensions of an assembled container are 70mm x 17.5mm. I had some o-rings laying around, so I put in a recess for those to seal around the bolts, although I'm not sure how much that's necessary, if at all… I put in an extra set of regular holes as well, in case you don't have any o-rings.
Hardware
- 3x M3 bolt (cca ≥5mm)
- 3x M3 nut
- 3x o-ring (optional)
Printing Instructions
The provided prusa slicer project (.3mf) already has all the right settings. Generally, I'd recommend using a default preset for a 0.2mm layer height, with ≥3 perimeters and painted supports for the recessed bottom faces. I like to print stuff like this from PETG, but PLA will probably do just fine, too.