1 / 4
Single extrusor Dual color
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
You can print each part with a different filament and then glue them together. I gave it a tolerance of 0.2mm, if it…
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 43
- Makes
- 1
- Views
- 368
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution
You can print each part with a different filament and then glue them together.
I gave it a tolerance of 0.2mm, if it still doesn't fit you can scale down the color part by a 1-2%, but it should fit anyways, you may not even need glue.
Print Settings
Rafts:
Doesn't Matter
Supports:
No
Infill:
10 - 15
Post-Printing
You may need to sand it down just a little
Category: Audio