Epstein's Yacht from “The Expanse”
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A phenomenal model done by Chris Kuhn and found on Sketchfab posted by owlstraw
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 193
- Makes
- 1
- Views
- 985
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles & Machines
- License
- Creative Commons — Attribution — Noncommercial
This is Epstein's Yacht from the series “The Expanse”.
It was created by Chris Kuhn and posted by owlstraw on Sketchfab as a 1pc model .
The Expanse is one of my all-time-favorite series and love the many different spaceships and unique design elements. I love all of the ones here and want to share with other makers as able.
I'm still trying to learn 3D Builder, Meshmixer etc. However, I was able to split this up using only PrusaSlicer. I know there are far-better ways to slice this for printing so by all means - please do so ;)
I printed this with my AnkerMake M5 LH 0.15, 15% infill and some tree supports depending on which part was printing. I have the antennae printed and just need to print and attach.
If you choose to do this, make sure to orient the “middle ball” and other aspects of this; i placed the larger antennae on the wrong side of the smaller model I made, and thankfully didn't make that same mistake on the larger one.
from SketchFab - “The ship is a solid, well-designed and well-built small yacht with a small living space. The ship had been designed around a standard engine configuration and used a well-known build code.”
CC0 License Original Author: Chris Kuhn
the uploader of the model is NOT Chris Kuhn nor claims to have authored the attached model
https://sketchfab.com/3d-models/epsteins-yacht-the-expanse-137498e7aabb47dfaee3fe2652fadefa